Metro-Tex is ready to serve your project needs with a wide-range of products and value-added services.

Here is a list of common components we supply as part of project packages:

  • Fabricated Ductile Iron Pipe - 3"-54"

    Fabricated in accordance with AWWA/ANSI A21.5/C115 latest revision, minimum Class 53 ductile iron pipe with ductile flanges. All flanges and pipe ends faced after fabrication.

  • Grooved Ductile Iron Pipe - 3”-48”

    Fabricated in accordance with AWWA/ANSI C606. Rigid or flexible groove as specified.

  • Swivel Anchor pipe couplings - 3”-30”

    Fabricated with ductile iron pipe, MJ glands with welded ductile or steel rings.

  • Ductile Iron Wall pipes and Sleeves - 3”-48”

    Fabricated to industry standards in Flanged, Grooved, Mechanical Joint or Plain End. Flanged or Mechanical can be tapped for studs.

  • Ductile Iron Filler Flanges

    Can be fabricated in straight or beveled typed in ductile iron. 30” and larger may be steel.

  • Flanged and MJ Fittings

    All flanged fittings conform to AWWA/ANSI A21.10/C110. All Mechanical Joint fittings conform to AWWA/ANSI A21.53/C153.

Metro-Tex is ready to serve your project needs with a wide-range of products and value-added services.

Here is a list of common components we supply as part of project packages:

  • Fabricated Ductile Iron Pipe - 3"-54"

    Fabricated in accordance with AWWA/ANSI A21.5/C115 latest revision, minimum Class 53 ductile iron pipe with ductile flanges. All flanges and pipe ends faced after fabrication.

  • Grooved Ductile Iron Pipe - 3”-48”

    Fabricated in accordance with AWWA/ANSI C606. Rigid or flexible groove as specified.

  • Swivel Anchor pipe couplings - 3”-30”

    Fabricated with ductile iron pipe, MJ glands with welded ductile or steel rings.

  • Ductile Iron Wall pipes and Sleeves - 3”-48”

    Fabricated to industry standards in Flanged, Grooved, Mechanical Joint or Plain End. Flanged or Mechanical can be tapped for studs.

  • Ductile Iron Filler Flanges

    Can be fabricated in straight or beveled typed in ductile iron. 30” and larger may be steel.

  • Flanged and MJ Fittings

    All flanged fittings conform to AWWA/ANSI A21.10/C110. All Mechanical Joint fittings conform to AWWA/ANSI A21.53/C153.